SonaTheater5.1 Home Theater System
SonaTheater™ 5.1
If you would like to have the very best sound for your home theater and not want huge bulky speakers all around
the room, then SonaTheater5.1 is the your best option.
Where are the speakers? Click for an answer >
SonaTheater 5.1 - Experience Home Theater wrap-around Sound SonaTheater 5.1 sustains a
wide distributed image in the listening room making the sound system ideal for home theater.
Perfectly defined sound is focused on the TV screen where the action is. Sonawall's SonaTheater 5.1 enlarges the
space in which high quality sound is enjoyable.
Your whole family will enjoy a new spacious freedom filled with high quality sound.
SonaTheater 5.1 Active sound system
SonaTheater Active 5.1 channel sub/sat system is suitable for connection to
all kinds of home theater or stereo receivers. The engineering design goal was to create the smallest possible
active subwoofer and satellite units in size with bass performance to compete with the largest subwoofers in the
market place with an off-the wall sound experience with an unsurpassed sound field image up high where your TV
mounted. SonaTheater 5.1 with a new dimension in sound up-on the wall where your TV is has the fastest,
tightest and deepest bass response in the market place in a small package never seen and
heard of before.
SonaTheater 5.1 Active Home Theater System Contents:
- 100watt RMS amplifier
- 6.8” high-power long excursion subwoofer.
- Frequency response: 30Hz-20.000Hz
- Subwoofer driver firing downward.
- 1 e/a Umitti Sonacenter channel speaker.
- 1 pair front left right Sonapod satellite speakers
- 1 pair rear left right Sonapod satellite speakers
- Low-Level Inputs: Line level RCA inputs to connect to the pre-amp or line level out puts of the full range
amplifier to the inputs of the subwoofer amplifier. The inputs are internally summed to mono.
- Low-Level Outputs: Line level that provide a line level full range output for the connection of additional
equipment. This out put is only available when a signal is present at the Low Level RCA outputs Input.
- Speaker High-Level Inputs: Used to connect from the speaker out puts of the full range amplifier or home
theater receiver to the subwoofer amplifier with speaker wire. A mono signal s derived from the stereo speaker
level source which then feeds the subwoofer amplifier input.
- Speaker High- Level Outputs: Used to connect from the subwoofer amp to pass signal
from the full range amp on to the main L/R speakers. Signal is only present on his output if the high-level
input is also used. The signal to the L/R speakers will be shaped by an internal 125Hz high-pass
crossover.
- Gain: Adjust the output level of the subwoofer amplifier.
- Frequency: Used to determine the frequency of the internal variable electronic crossover.
- Adjustable from 30Hz to 180Hz and has a slope of 12dB. Per octave.
- Power switch: On. Off, and Auto mode. When the Auto on position is selected, the amp is in a standby mode
until an input signal is detected. The amp will go back to standby mode some minutes after the input stops. In
Auto mode, the Power LED will remain illuminated, even when the amplifier is standing by.
- Built-in comprehensive internal protection against shorted speaker loads, thermal faults, and overload
conditions.
- Phase Switch: On, Off, and Auto mode. When the Auto on position is selected, the amp is in a standby mode
until an input signal is detected. The amp will go back to standby mode some minutes after the input stops . In
Auto mode, the Power LED will remain illuminated, even when the amplifier is standing by.
Contents:
- 1 pr Sonapod Front L/R speaker
- 1 pr Sonapod Rear L/R speaker
- 1 e/a Umitti Center speaker
- 1 e/a ST-100 Active amp/sub-woofer unit.
Sonapod satellite speaker: 2.5" x 2.5" x 3"
Woofer unit: 15" x 15" x 13.5"
Price: $799.99
View Our Video on YouTube
Click Thru for More Details and Puchase
| 
